View LA1844MC_4867306.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage conditi on (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. 62712 sy 20120611-s00003/51612 sy no.a2057-1/11 LA1844MC overview the LA1844MC is designed for use in mini systems and is a single-chip tuner ic that provides electronic tuning functions using sd/if-count technique. it incorporates a pilot cancel er and an adjustment-free mux vco circuit, thus allows additional parts to be reduced. features ? integrated mpx vco (ceramic resonators are no longer required.) ? built-in adjacent channel interference rejection function (114khz, 190khz) ? supports both sd and if-count techniques ? both fm sd sensitivity and bandwidth can be set ? pilot canceler built in. ? package : mfp24sj(300mil) functions ? am : rf amplifier, mixer, oscillator, if amplifier, det ector, agc, sd, oscillator buffer, if buffer, stereo if output, agc time constant switch ? fm if : if amplifier, quadrature detector, s-meter, sd (signal detection), s-curve detection, if buffer output ? mpx : pll stereo decoder, stereo di splay, forced monaural, vco stop, audi o muting, adjacent channel interference rejection function, pilot canceler orderin g number : ena2057a monolithic linear ic for home stereo single-chip tuner ic
LA1844MC no.a2057-2/11 specifications maximum ratings at ta = 25 c parameter symbol conditions ratings unit maximum supply voltage v cc max 9v allowable power dissipation pd max ta 45 c 400 mw ta 80 c 260 mw operating temperature topr -20 to +80 c storage temperature tstg -20 to +150 c operating conditions at ta = 25 c parameter symbol conditions ratings unit recommended supply voltage v cc 5v operating supply voltage range v cc op 4.3 to 8.0 v electrical characteristics at ta = 25 c fm mono characteristics at f c = 10.7mhz, v cc = 5v parameter symbol conditions ratings unit min typ max current drain i cco-fm with no input signal 18 28 38 ma demodulator output v ofm 100db , 100% modulation, fm = 1khz 210 330 420 mvrms total harmonic distortion thd fm mono 100db , 100% modulation, fm = 1khz 0.35 1.5 % signal-to-noise ratio s/n fm 100db , 100% modulation, fm = 1khz 73 80 db am rejection ratio amr 100db , am 30% modulation, fm = 1khz 47 65 db 3db sensitivity vi-limit 100db , 100% modulation, fm = 1khz output reference, -3db input 32 40 db sd sensitivity led sens 0% modulation 37 47 57 db if counter buffer output v ifbuff-fm 100db 200 275 400 mvrms mute attenuation mute-att 100db , 100% modulation, fm = 1khz 76 db fm stereo characteristics at f c = 10.7mhz, 100db , v cc = 5v parameter symbol conditions ratings unit min typ max separation sep l+r = 90%, pilot = 10%, fm = 1khz 30 42 db stereo on level st on pilot input 1.5 3.5 5.5 % total harmonic distortion thd-main pilot input 0.45 1.5 % adjacent channel rejection ratio 1 br1 fs = 113khz, vs = 90%, pilot = 10% : the left - right modulation, demodulated output 36 db adjacent channel rejection ratio 2 br2 fs = 189khz, vs = 90%, pilot = 10% : the left - right modulation, demodulated output 41 db carrier leak cl l+r = 90%, pilot = 10% reference, pilot = 10% output 38 44 db am characteristics at f c = 1000khz, v cc = 5v parameter symbol conditions ratings unit min typ max current drain i cco-am with no input signal 11 22 33 ma detector output v oam1 23db , 30% modulation, fm = 1khz 40 80 160 mvrms v oam2 80db , 30% modulation, fm = 1khz 90 160 230 mvrms signal-to-noise ratio s/n am1 23db , 30% modulation, fm = 1khz 17 23 db s/n am2 80db , 30% modulation, fm = 1khz 48 54 db total harmonic distortion thd am1 80db , 30% modulation, fm = 1khz 0.4 1.1 % thd am2 107db , 30% modulation, fm = 1khz 0.5 1.3 % sd sensitivity sd-sens 0% modulation 11 21 31 db local oscillator buffer output v osc-am with no input signal 100 140 200 mvrms if counter buffer output v ifbuff-am 23db 140 285 400 mvrms
LA1844MC no.a2057-3/11 package dimensions unit : mm 3419 sanyo : mfp24sj(300mil) 1 24 13.0 0.45 8.0 6.0 0.15 1.0 0.4 (1.0) 1.9 max 0.1 (1.5) 2
LA1844MC no.a2057-4/11 block diagram
LA1844MC no.a2057-5/11 test circuit 12 3 4 5 6 7 8 9 101112 24 23 22 21 20 19 18 17 16 15 14 13 300 0.047 f 75 fm-in (10.7mhz) LA1844MC (mfp24sj) 10k 50k 50k tu-led v-sd st-led v-st 1000pf am if am/fm if-buff 1000pf 20pf normal am 1f 3k 0.47 f fm mono + + 1f + v cc 5.0v 6.8k 5.6k 39pf 20pf hw50425 1000pf osc buff 0.047 f 33 f + 600base-10471 detector coil discriminator 3.3 f + 50 am-in (1mhz) 0.047 f 39mh 0.047 f 22 f + 10 f + 4.7 f + 20k 0.01 f 20k 1000pf 0.1 f 65k 0.0047 f 0.015 f 0.015 f l out lpf lpf r out 0db a a hw6215
LA1844MC no.a2057-6/11 pin functions pin no. function pin voltage (v) equivalent circuit notes 1 fm if input vreg input impedance r i = 330 2 am mixer output v cc connect the mixer coil between this pin and v cc 3 reg 2.1 vreg = 2.4v 4 am if input vreg input impedance r i = 2k 5 gnd 0 6 7 tu-led st-led / am-if output v cc active low open collector 8 fm detector v cc the 600beas-10471 (toko mfg. co., ltd.) is recommended for detector coil. 9 vcc 5.0 10 am / fm if counter output, output control switch, mute switch 0 v 10 0.5v : reception state (normal) 1.4v v 10 2.2v : muting on (mute) v 10 3.5v : if counter output and muting on (seek) 11 phase comparator low-pass filter (am/fm switching) v cc -1.0 the device operates in am mode when a current of over 200 a flows from pin 12. continued on next page.
LA1844MC no.a2057-7/11 continued from preceding page. pin no. function pin voltage (v) equivalent circuit notes 12 pilot detector low-pass filter (forced mono) (vco stop) v cc -1.0 the device is forced to monaural when a current of over 50 a flows from this pin. the vco is stopped when a current of over 200 a flows from this pin. 13 14 l outputs r outputs 3.2 output impedance r o = 3.3k 15 pilot canceler output vreg 16 decoder input vreg inverting input pin rnf = 20k 17 pll input vreg input impedance r i = 20k 18 fm demodulator output vreg+0.7 output impedance r o = 2.3k the channel separation can be adjusted with an external capacitor connected between this pin and ground. 19 am detector output 0 (fm) 1.5 (am) output impedance r o = 3.3k 20 s meter, am agc 0.2 (fm) 0.9 (am) the resistance of the built-in resistor r is 13.9k the sd responce during seek operation is determined with the external capacitor connected to this pin. continued on next page.
LA1844MC no.a2057-8/11 continued from preceding page. pin no. function pin voltage (v) equivalent circuit notes 21 am rf input vreg must be used at the same potential as pin 22 22 afc vreg the fm sd bandwidth can be adjusted with the external resistor connected between this pin and pin 3 (reg) 23 osc v cc connect the oscillator coil between this pin and pin 9 (v cc ) note: impedance of the secondary oscillator coil must be 5k or higher. 24 oscillator buffer output, fm sd sensitivity adjustment v cc -1.4 the fm sd sensitivity can be adjusted with an external resistor connected to this pin. output impedance r o = 200 note: resistance of the external resistor connected to the pin 24 must be 3.3k or higher.
LA1844MC no.a2057-9/11
LA1844MC no.a2057-10/11
LA1844MC ps no.a2057-11/11 this catalog provides information as of jun, 2012. specifications and information herein are subject to change without notice. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specif ications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equ ipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.

▲Up To Search▲

Price & Availability of LA1844MC

	To Download LA1844MC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .